Hioki CM4375 AC/DC Clamp meter 1000A (True RMS)

SKU
CM4375
Out of stock

1000 A AC/DC, 1700 V DC voltage
Special design, Thin sensor structure
Easily get into tight spaces between cables
Automatic AC/DC function helps boost work efficiency
CAT IV 600V, CAT III 1000 V

Hioki CM4375 AC/DC Clamp meter

The CM4375 is a 1000A AC/DC True RMS clamp meter that features a uniquely designed slim jaw that lets you easily get into the narrow gaps between cables in crowded electrical distribution boxes without fear of damaging the cables or the clamp meter. Regular maintenance and management are essential in order to keep electrical equipment operating properly in buildings and manufacturing plants. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment.

Current Sensors are Designed to Fit Easily Around Cables in Confined Spaces

Thinner jaws that fit easily between cables in confined spaces
AC Current
Range Resolution Frequency range Accuracy
1000 A 1.0 A to 30.0 A (0.1 A) 10 Hz ≤ f < 45 Hz ± 1.8% rdg. ± 1.0 A
45 Hz ≤ f ≤ 66 Hz ± 1.3% rdg. ± 0.8 A
66 Hz < f ≤ 1 kHz ± 2.0% rdg. ± 1.0 A
30.1 A to 900.0 A (0.1 A) 10 Hz ≤ f < 45 Hz ± 1.8% rdg. ± 0.5 A
45 Hz ≤ f ≤ 66 Hz ± 1.3% rdg. ± 0.3 A
66 Hz < f ≤ 1 kHz ± 2.0% rdg. ± 0.5 A
900.1 A to 999.9 A (0.1 A) 10 Hz ≤ f < 45 Hz ± 2.3% rdg. ± 0.5 A
45 Hz ≤ f ≤ 66 Hz ± 1.8% rdg. ± 0.3 A
66 Hz < f ≤ 1 kHz ± 2.5% rdg. ± 0.5 A
DC+AC Current
Range Resolution Frequency range Accuracy
1000 A 1.0 A to 30.0 A (0.1 A) 10 Hz ≤ f < 45 Hz ± 1.8% rdg. ± 1.2 A
DC, 45 Hz ≤ f ≤ 66 Hz ± 1.3% rdg. ± 1.8 A
66 Hz < f ≤ 1 kHz ± 2.0% rdg. ± 1.2 A
30.1 A to 900.0 A (0.1 A) 10 Hz ≤ f < 45 Hz ± 1.8% rdg. ± 0.7 A
DC, 45 Hz ≤ f ≤ 66 Hz ± 1.3% rdg. ± 1.3 A
66 Hz < f ≤ 1 kHz ± 2.0% rdg. ± 0.7 A
900.1 A to 999.9 A (0.1 A) 10 Hz ≤ f < 45 Hz ± 2.3% rdg. ± 0.7 A
DC, 45 Hz ≤ f ≤ 66 Hz ± 1.8% rdg. ± 1.3 A
66 Hz < f ≤ 1 kHz ± 2.5% rdg. ± 0.7 A
DC Current
Range Accuracy range Resolution Accuracy
1000 A ± 1.0 A to ± 30.0 A 0.1 A ± 1.3% rdg. ± 0.8 A
30.1 A to 999.9 A 0.1 A ± 1.3% rdg. ± 0.3 A
DC Power (Current: Fixed to 1000 A range)
Range Resolution Accuracy
0.000 kVA to 1700 kVA
(Automatically switched based on voltage range)
0.001 kVA ± 2.0% rdg. ± 20 dgt.
± 4.0% rdg. ± 20 dgt.*

*For voltage range of 1500 V and input voltage range of ± 1001 V to ± 1700 V.

Current measurement 1000 A AC/DC max.
Core jaw diameter ø34 mm
Crest factor For the 1000 A range, 1.5
Smallest jaw cross-section 9.5 mm
Core jaw diameter 53 x 20 mm
Power requirement Battery AA x 2
Dimensions/ Weight 65 x 242 x 35 mm/ 330 g

SKUCM4375
Weight330.000000
Dimension65 x 242 x 35 mm
ManufacturerHioki
Data loggerNo
Resolution 0.1A
Measurement RangeAC/DC Current: 1000 A
Other Function
  • Automatic AC/ DC detection
  • DC current and DC voltage polarity detection function
  • MAX/ MIN/ AVG/ PEAK MAX/ PEAK MIN value display
  • Low-pass filter function
  • Display value hold
  • Auto hold, Backlight
  • Auto power save
  • Buzzer sound
  • Zero-adjustment
Power SupplyBattery AAA x2
Water resistanceNo
Sensor Output InterfaceNo
AccuracyDepend on measurement range
Your Rating

Product's Video

อุปกรณ์ที่มีมาในชุด:

  • Main unit × 1
  • Test Lead L9207-10 × 1
  • Carrying Case C0203 × 1
  • Battery AAA × 2
  • Instruction Manual × 1
  • Precautions Concerning Use of Equipment that Emits Radio Waves × 1

อุปกรณ์เสริม (แยกจำหน่าย):

L9207-10

TEST LEAD length 90 cm.
L4933

Contact Pin Set (Can be connected to the tip of the L9207-10, which comes with the instrument.)
L4934

Small Alligator Clip Set (Can be connected to the tip of the L9207-10, which comes with the instrument.)
C0203
CARRYING CASE
CARRYING CASE.
L9300

TEST LEAD length 95 cm.
DT4910
Hioki-DT4910 Thermocouples Type K For Digital Multimeter
K type, tip exposed, 0.3 mm (0.01 in) diameter, 80 cm
L4931
Hioki-L4931 Extension Cable (1.5m)
Expands the length of L4930/ L4940, 1.5 m length
L4939
Hioki-L4939 Breaker Pin Set
Attaches to the tip of the L4930/ L4940, CAT III 600 V
L4938
Hioki-L4938 Test Pin Set
Attaches to the tip of the L4930/ L4940, CAT III 600 V
L4936
Hioki-L4936 Bus Bar Clip Set
Attaches to the tip of the L4930/ L4940, CAT III 600 V
L4937
Hioki-L4937 Magnetic Adapter
Attaches to the tip of the L4930/ L4940, CAT III 1000 V
L4932
Hioki-L4937 Magnetic Adapter
Attaches to the tip of the L4930/ L4940, CAT IV 600 V, CAT III 1000 V
L4930
Hioki-L4930 Connection Cable (1.2m)
1.2 m length, CAT IV 600 V, CAT III 1000 V
L4935
Hioki-L4935 Alligator Clip Set
Attaches to the tip of the L4930/ L4940, CAT IV 600 V, CAT III 1000 V