FLIR MR160 Imaging Moisture Meter

SKU
MR160
฿31,100.00
In stock

Imaging Moisture Meter
Range: 0 to 100% WME
Field of view 51° × 38°, 4800 pixels
IGM™ technology, Color Moisture Alert
FLIR, USA

Add to Compare

FLIR MR160 Imaging Moisture Meter

Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box - or as the perfect complement to any high resolution thermal camera you already own.

▼ Scanning ceiling & wall joint for moisture issues
Scanning ceiling & wall joint for moisture issues Flir MR160 Diagram
IGM technology shows you cold spots, guiding you where to measure
▲ IGM technology shows you cold spots, guiding you where to measure

▼ Thermal Imaging

Thermal Imaging Detector FLIR Lepton microbolometer
Image Calibration Automatic
Thermal Image Resolution 4800 pixels (80 × 60)
Spectral Response 8 to 14 μm
Field of View 51° × 38º
Thermal Sensitivity < 0.15ºC
Image Frame Rate 9 Hz
Image Display Color Moisture Alert
Minimum Focus Distance 10 cm

▼ Moisture Measurement

Accuracy 0 to 100% WME (± 5%)
Pin Moisture Groups 9 material groups
Pinless Moisture Range 0 to 100 relative measurement
Pinless Measurement Depth 19 mm Max.
Measurement Resolution 0.1
Response Time Pinless 100 ms
Response Time Pin Mode 750 ms

▼ General Information

Display Type QVGA (320 × 240 pixels) 2.3" 64k color TFT
Saved Image File format BMP with measurement values overlaid
Stored Image Capacity 9999 images
Laser Orientation Single laser pointer to center of thermal image
Certification Standards EN61326 (EMC), EN61010 (Battery, Charger), EN60825-1 Class 2 (Laser)
Drop Test 3 Meters
Power requirement Intergrated rechargable battery 3.7 V, 3000 mAh Li-ion rechargeable via micro USB
Dimensions / Weight 175 x 72 x 42 mm / 323 g
SKUMR160
Weight323.000000
Dimension175 x 72 x 42 mm
ManufacturerFLIR
Data loggerYes
Destructive?Non-destructive
Resolution 0.1
Measurement Range0 to 100% WME (± 5%)
Other FunctionNo
Power Supply3.7V, 3000mAh battery, rechargeable via USB
Water resistanceIP54
Sensor Output InterfaceNo
Accuracy±5%
Your Rating

Product's Video

ความชื้นสำหรับทาสีผนังปูน | Concrete & Mortar Moisture Meters

การวัดความชื้นคอนกรีต ความชื้นปูน มีความสำคัญเป็นอย่างมากต่อการทาสีอาคาร บ้าน ผนัง และเครื่องมือสำหรับวัดความชื้นคอนกรีตและปูนนั้น คือ Concrete & Mortar Moisture Meters หรือ Protimeter ที่มักเรียกกัน มีหลักการวัดค่าความชื้นจากอัตราการไหลผ่านของไอออนที่ผิวคอนกรีต โดยผิวคอนกรีตจะมีลักษณะเป็นรูพรุน เพื่อให้เกิดการดูดซับ หรือซึมผ่านของน้ำ

กล้องถ่ายภาพความชื้น (Imaging Moisture Meter FLIR MR 160)

กล้องถ่ายภาพความชื้น (Imaging Moisture Meter FLIR MR 160) กล้องสแกนภาพความชื้นแบบ 2 in 1 เพื่อช่วยในการสแกนหาเป้าหมายความชื้นได้อย่างรวดเร็วและสามารถตรวจวัดและวิเคราะห์การอ่านค่าร่วมกับ Pinless Sensor โดยใช้หลักการของ Electromagnetic Wave technology ที่ไม่ทำลายพื้นผิววัสดุ และยังมี

Optional Accessories:

  • MR05 Impact pin probe
  • MR10 Protective case
  • MR05-PINS1
  • MR05-PINS2 (wide)