Ono sokki HR-6800 เครื่องวัดความเร็วรอบแบบดิจิตอล

SKU
HR-6800
฿39,700.00
Pre-Order Item
Out of stock

เครื่องวัดความเร็วรอบแบบดิจิตอล ใช้การคำนวณแบบ FFT calculation method
ช่วงการวัดความเร็วรอบ 100 r/min ถึง 999,990 r/min 
วัดความเร็วรอบ DC motor, compressor, เครื่องยนต์, general rotating objects
บันทึกข้อมูลได้ 20 ค่า, ฟังก์ชั่น Peak Hold, Max. Min displayed
**ราคาเฉพาะตัวเครื่องไม่รวมเซ็นเซอร์**

Ono sokki HT-6200 เครื่องวัดความเร็วรอบแบบดิจิตอล

เครื่องวัดความเร็วรอบแบบพกพา ตัวเครื่องออกแบบให้มีแบตเตอรี่ภายในตัว เหมาะสำหรับการวัดเครื่องยนต์เบนซิน, ดีเซล, รถยนต์ไฟฟ้า (EV/HEV) และวัดรอบทั่วไป

Target measurement objects Rotating objects used in dentistry, rotating objects used in texturizing machine, rotating objects used in high-speed machine tools
Note: Target measurement objects must be magnetized.
Display Large-size 5-digit LCD (Character height: 10.2 mm)
Measurement time Within 50 ms + the time required for 10 input signal cycles
Display refresh rate Approx. 1 second or 0.5 second, selectable
Measurement unit 10 r/min (rotational speed)
Rotational speed measurement range
Selected type Range Rotational speed range
Type A Hi 10,000 to 999,990 r/min
Lo 100 to 50,000 r/min
Type B - 200,000 to 999,990 r/min
Note: When the number of pulses setting is “1”.
Measurement accuracy Displayed value x ( ± 0.02 %) ± 1 count
Peak hold function Maximum value (MAX), minimum value (MIN)
Memory function Up to a maximum of 20 data
Over-range display An “ERROR” mark is displayed when the measured value exceeds the measurement range.
Rotation upper limit alarm function An upper limit alarm mark ( ↑ mark) is displayed when the rotational speed exceeds the preset upper limit value.
Analog output Output in proportional to the displayed rotational speed values.
Output voltage: 0 to 1V / 0 to F.S. (F.S. is specified by user.)
Output update time: Within 50 ms + the time required for 10 input signal cycles
Monitor output Analog output after the sensor signal waveform has been shaped.
(prior to pulse waveform conversion)
Pulse output One pulse per signal detected
Output voltage: Hi level; At least 4.5 V
                       Lo level; Up to 0.5 V
Power source Four AAA-type batteries (1.5 V) or exclusive AC adapter (PB-7090, sold separately)
Battery life Approx. 13 hours (when the backlight is OFF.)
Approx. 8 hours (when the backlight is ON.)
(when alkaline batteries are used at 20°C)
Operating temperature 0 to +40°C
Storage temperature -10 to +50°C
Outer dimensions 66 (W)  x  189.5 (L)  x  47.5 (D)  mm
Weight Approx. 280 g (including the batteries)
Accessories
  • AAA-type batteries 4 pieces
  • Tripod mounting adapter (MI-0301) 1 piece
  • Carrying case
SKUHR-6800
Weight280.000000
Dimension47.5 x 189.5 x 66 mm
ManufacturerOnosokki
Data loggerNo
Special SpecificationNo
Resolution No
Measurement RangeLo: 100 to 50,000 r/min
Hi: 10,000 to 999,990 r/min
Other FunctionNo
Power SupplyBattery AAA x 4
Water resistanceNo
Sensor Output InterfaceNo
Accuracy±
Your Rating