GW Instek GPS-3030D DC Power Supplies

SKU
GPS-3030D
Out of stock

Light and Compact Design
0.01% High Regulation
Constant Voltage and Constant Current Operation
Remote Control for External Programmability
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
Series or Parallel Operation

GW Instek GPS-3030D DC Power Supplies

Single output, 54 to 90W, linear DC power supplies.
Digital display meters with varying power outputs. 
Overload and reverse polarity protection as well as high regulation and low ripple / noise.
That are maintained at 0.01% and < 1mVrms, respectively.
Remote control terminals offer programming and operation from an external device.

Display Meter Output Watts (W) Output Volts (V) Output Amps (A) Weight (kg)
Digital 90W 0 ~ 30 0 ~ 3 5
CONSTANT VOLTAGE OPERATION
Regulation Line regulation≦0.01% + 3mV
Load regulation≦0.01% + 3mV (rating current≦3A)
Load regulation≦0.01% + 5mV (rating current > 3A)
Ripple & Noise ≦0.5mVrms 5Hz ~ 1MHz (rating current≦3A)
≦1mVrms 5Hz ~ 1MHz (rating current > 3A)
Recovery Time ≦100μS ( 50% load change, minimum load 0.5A )
Temp. Coefficient ≦300ppm/°C
Output range 0 to rating voltage continuously adjustable
CONSTANT CURRENT OPERATION
Regulation Line regulation≦0.2% + 3mA
Load regulation≦0.2% + 3mA
Ripple Current ≦3mArms
Output Range 0 to rating current continuously adjustable (Hi/Lo range switchable)
METER
Analog V-meter and I-meter
2.5 class
Dimensions 50 x 50 mm
Digital 31∕2 digital 0.5" LED display (3030D)
31∕2 digital 0.39" LED display (3030DD)
Accuracy ±(0.5﹪of rdg + 2 digits)
INSULATION
Chassis and Terminal 20MΩ or above (DC 500V)
Chassis and AC Cord 30MΩ or above (DC 500V)
POWER SOURCE
  AC 100V/120V/220V/240V±10%, 50/60Hz
SKUGPS-3030D
Weight5000.000000
Dimension128(W) x 145(H) x 285(D)mm
ManufacturerGW_Instek
Your Rating