HIOKI MR8880 เครื่องวัดและบันทึกไฟฟ้า MEMORY HiCORDER

SKU
MR8880-20
Out of stock

เครื่องวัดและบันทึกไฟฟ้า MEMORY HiCORDER
รองรับการวัดสูงสุด 1000V แบบ Direct Input
บันทึกข้อมูล Multi-channel สูงสุด 60 ch ที่ 10 msec
ฟังก์ชั่นการวิเคราะห์ข้อมูล FFT Analysis
หน้าจอแสดงผล QVGA-TFT LCD ขนาด 8.4 นิ้ว
HIOKI, JAPAN

สินค้าลงทะเบียนโปรดติดต่อฝ่ายขาย

HIOKI MR8880 เครื่องวัดและบันทึกไฟฟ้า MEMORY HiCORDER

Hioki Memory HiCorders เครื่องวัดและบันทึกไฟฟ้า waveform แบบ high-speed ที่สามารถวัดและบันทึกสถานการณ์ของข้อมูลต่าง ๆ ที่เปลี่ยนแปลงอย่างรวดเร็วหลายอย่างพร้อมกันเนื่องจากการแยกระหว่างช่องสัญญาณและจากแต่ละช่องอย่างสมบูรณ์ MR8880 เป็นเครื่องบันทึกข้อมูลแบบพกพา (DAQ) พร้อม built-in 4-analog channels ที่สามารถรองรับการต่อ direct input ได้สูงสุดถึง 600V เหมาะสำหรับการตรวจสอบวัดค่าระบบไฟฟ้าแบบ 3-phase

Number of channels 4 analog channels + 8 logic channels (standard)
Note: Isolated analog channels, isolated input and frame, logic has common GND
Measurement ranges (10 div full-scale) 4 channels of voltage measurement; mode switchable between instantaneous waveform or RMS value, 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range
RMS value mode: 30 Hz to 10 kHz, Crest factor: 2
Max. rated voltage Between terminals: 600 V AC/DC, Between terminal to earth: 600 V AC/DC CAT III; 300 V AC/DC CAT IV
Frequency characteristics DC to 100 kHz (±3dB)
Time axis (High-speed function) 100 µs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range
Recording intervals (Real-time function) 100 µs to 1 minute, 19 selections (simultaneous sampling in all channels)
Measurement functions High-speed function (high speed recording)
Real-time function (actual time recording)
Memory capacity 14-bits × 1M-words/ch (1 word = 2 bytes)
Removable storage CF card slot ×1 (Up to 2 GB), USB 2.0 memory ×1
Printing [Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec
Note: Printing is not supported when using alkaline batteries
Display 5.7-inch VGA-TFT color LCD (640 × 480 dots)
Displayable languages English, Japanese, Chinese
Communication interfaces USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control
Power supply AC adapter Z1002: 100 to 240 V AC (50/60 Hz), 45 VA (include AC adapter, when Real-time recording), 107 VA (include AC adapter, when Real-time recording and printing)
Battery pack Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (with back-light ON)
LR6 (AA) alkaline batteries ×8, Continuous use 40 minutes, (with back-light ON, cannot be used with the Printer unit)
DC power supply: 10 to 28 V DC (cable available by special order)
Dimensions and mass 205 mm (8.07 in)W × 199 mm (7.83 in)H × 67 mm (2.64 in)D, 1.66 kg (58.6 oz) (with the Battery pack installed)
When printer is combined - with main unit: 303 mm (11.93 in)W × 199 mm (7.83 in)H × 67 mm (2.64 in)D, 2.16 kg (76.2 oz) (with the Battery pack installed)
SKUMR8880-20
Weight1660.000000
Dimension205 × 199 × 67mm
ManufacturerHioki
Data loggerYes
Resolution No
Measurement Range4 channels of voltage measurement; mode switchable between instantaneous waveform or RMS value, 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range
RMS value mode: 30 Hz to 10 kHz, Crest factor: 2
Other FunctionHigh-speed function (high speed recording)
Real-time function (actual time recording)
Power Supply100 to 240 V AC (50/60 Hz), 45 VA (include AC adapter, when Real-time recording), 107 VA (include AC adapter, when Real-time recording and printing)
Water resistanceNo
Sensor Output InterfaceNo
Accuracy±
Your Rating

Accessories Included:

  • Instruction manual ×1
  • AC adapter Z1002 ×1
  •  Alkaline battery box ×1
  • Strap ×1
  • USB cable ×1
  • Application disk (Wave viewer Wv, Communication commands table) ×1
Storage media
  • RECORDING PAPER 9234
  • PRINTER UNIT MR9000
Storage media
  • PC CARD 512M 9728
  • PC CARD 1G 9729
  • PC CARD 9830
  • USB DRIVE Z4006
Input cable (A)
  • GRABBER CLIP 9790-02
  • CONTACT PIN 9790-03
  • CONNECTION CORD L9790
  • ALLIGATOR CLIP L9790-01
Input cable (B)
  • GRABBER CLIP 9243
  • CONNECTION CORD L9198
Input cable (D)
  • DIFFERENTIAL PROBE P9000
  • AC ADAPTER Z1008
Input cable (E)
  • DIFFERENTIAL PROBE 9322
  • AC ADAPTER 9418-15
Non-contact Voltage measuring
  • NON-CONTACT AC VOLTAGE PROBE SP3000
  • NON-CONTACT AC VOLTAGE PROBE SP3000
  • AC VOLTAGE PROBE SP9001
Logic signal measurement
  • LOGIC PROBE 9320-01
  • CONVERSION CABLE 9323
  • LOGIC PROBE MR9321-01
Up to 200 A (High precision)
  • AC/DC CURRENT PROBE CT6843-05
  • CLAMP ON SENSOR 9272-05
  • AC/DC CURRENT SENSOR CT6862
  • AC/DC CURRENT SENSOR CT6862-05
  • AC/DC CURRENT SENSOR CT6863-05
  • AC/DC CURRENT PROBE CT6841-05
Up to 1000 A (High precision)
  • AC/DC CURRENT PROBE CT6844-05
  • AC/DC CURRENT SENSOR CT6875
  • AC/DC CURRENT PROBE CT6845-05
  • AC/DC CURRENT SENSOR CT6876
  • AC/DC CURRENT PROBE CT6846
  • AC/DC CURRENT PROBE CT6846-05
POWER SUPPLY for Current Sensors
  • CONNECTION CORD L9217
  • SENSOR UNIT CT9555
  • SENSOR UNIT CT9556
  • SENSOR UNIT CT9557
100 A to 2000 A (Medium speed)
  • AC/DC CURRENT SENSOR CT7631
  • AC/DC AUTO-ZERO CURRENT SENSOR CT7736
  • OUTPUT CORD L9095
  • AC/DC CURRENT SENSOR CT7636
  • AC/DC AUTO-ZERO CURRENT SENSOR CT7742
  • AC/DC CURRENT SENSOR CT7642
  • DISPLAY UNIT CM7290
  • AC/DC AUTO-ZERO CURRENT SENSOR CT7731
  • DISPLAY UNIT CM7291
500 A to 5000 A
  • CLAMP ON PROBE 9018-50
  • CLAMP ON PROBE 9132-50
  • AC FLEXIBLE CURRENT SENSOR CT9667
Leak Current
  • CONVERSION ADAPTER 9199
  • AC ADAPTER 9445-02
  • AC ADAPTER 9445-03
  • CLAMP ON LEAK HiTESTER 3283
Power supply
  • BATTERY PACK Z1000
  • AC ADAPTER Z1002
Other options
  • CARRYING CASE C1003
  • CONNECTION CORD L9217