Myron Ultra-4PII เครื่องวัดและทดสอบคุณภาพน้ำ 4in1

SKU
Ultra-4PII
฿40,300.00
Pre-Order Item
Out of stock

ULTRAMETER II™ 4PII เครื่องวัดและทดสอบคุณภาพน้ำ 4in1
รองรับการวัด Conductivity | TDS | Resistivity | Temp.
หน่วยความจำในการบันทึกและจัดเก็บการอ่าน 100 รายการ 
ข้อมูลที่บันทึกมีรายละเอียดของวันที่และเวลาของการบันทึก
สามารถถ่ายโอนข้อมูลผ่าน wireless โดยใช้งานผ่าน bluDock™
ตัวเครื่องกันน้ำมาตรฐาน IP67
Made in USA

 

Add to Compare

Myron Ultra-4PII เครื่องวัดและทดสอบคุณภาพน้ำ 4in1 (Conductivity, TDS, Resistivity, Temp.)

ULTRAMETER II™ 4PII เครื่องวัดและทดสอบคุณภาพน้ำ 4in1 ที่รองรับการวัดค่า Conductivity | TDS | Resistivity | Temp. ในเครื่องเดียว ตัวเครื่องมีหน่วยความจำในการบันทึกข้อมูลที่ 100 รายการ ข้อมูลที่บันทึกจะมีรายละเอียดของวันที่และเวลาของการบันทึกไว้ด้วยเพื่อความถูกต้องของข้อมูล สามารถถ่ายโอนข้อมูลผ่านสัญญาณ Wireless โดยการใช้งานผ่าน bluDock™ Wireless Data Transfer Module (แยกจำหน่าย) ตัวเครื่องกันน้ำมาตรฐาน IP67 สามารถจุ่มด้านบนของตัวเครื่องไปตักน้ำตัวอย่างได้เลย

Advanced Features

  • ตัวเครื่องถูกปรับเทียบจากโรงงาน ด้วยโซลูชันที่ตรวจสอบย้อนกลับได้ตามมาตรฐาน NIST มาพร้อมกับใบรับรองการตรวจสอบย้อนกลับ NIST
  • หน้าจอ LCD แสดงสูงถึง 9999 หน่วย ช่วยให้มั่นใจถึงระดับความละเอียด
  • เทคโนโลยีเซลล์การนำไฟฟ้าแบบสี่ขั้วขั้นสูงของเซ็นเซอร์ pH/ ORP จึงให้ความมั่นยำระดับสูง และไม่เหมือนใครและวงจรไมโครโปรเซสเซอร์ที่เปี่ยมประสิทธิภาพ
  • สามารถเปลี่ยนได้ในฟิลด์ของเซ็นเซอร์ pH/ ORP ทำให้ช่วยยืดอายุการใช้งาน
  • ตัวเครื่องสามารถคำนวณค่าความอิ่มตัวของดัชนี LSI (Langelier Saturation Index) โอกาสการเกิดตะกรันหินปูน
  • การชดเชยอุณหภูมิที่ปรับได้โดยผู้ใช้งาน (up to 9.99%/°C) และสามารถปิดการใช้งานสำหรับการการอ่านที่ไม่ต้องการการชดเชยอุณหภูมิ
  • ผู้ใช้ปรับอัตราส่วนการแปลงค่า Conductivity/ TDS เพื่อความแม่นยำยิ่งขึ้น เมื่อวัดนั้นเป็นโซลูชันที่ไม่มีในไมโครโปรเซสเซอร์ของเครื่อง
  • ปิดเครื่องอัตโนมัติเมื่อไม่ได้ใช้งานช่วยยืดอายุการใช้งานของแบตเตอรี่ 9V ก้อนเดียวใช้ได้นานสูงสุด 100 ชั่วโมง/ การทดสอบ 5,000 ครั้ง
  • ไมโครโปรเซสเซอร์จะไม่ถูกลบ สามารถสำรองข้อมูลได้แม้ในขณะที่เปลี่ยนแบตเตอรี่ รับประกันการสอบเทียบและข้อมูลหน่วยความจำทั้งหมดจะถูกเก็บไว้

Advanced Design & Superior Performance ULTRAMETER II™

  • Choice of KCl, NaCl, and 442™ Natural Water Standards
  • ORP mV to ppm free chlorine conversion (Ultra-6PFCe Only)
  • pH/ORP Sensor protective cap (Ultra-6PFCe Only)
  • Four-digit display for full 9999 readings, with autoranging capability up to 200 mS/200 ppt
  • Powerful microprocessor based surface-mount circuitry
  • Display prompts for simple pH calibration
  • Real Time Clock
  • Memory for 100 readings with Date & Time Stamp
  • Factory calibrations stored in microprocessor
Myron Ultra-6PFCe เครื่องวัดและทดสอบคุณภาพน้ำ 7in1 (Conductivity, TDS, Resistivity, pH, ORP, Free Chlorine, Temp.)
Myron Ultra-6PFCe เครื่องวัดและทดสอบคุณภาพน้ำ 7in1 (Conductivity, TDS, Resistivity, pH, ORP, Free Chlorine, Temp.)
Myron Ultra-6PFCe เครื่องวัดและทดสอบคุณภาพน้ำ 7in1 (Conductivity, TDS, Resistivity, pH, ORP, Free Chlorine, Temp.)
Myron Ultra-6PFCe เครื่องวัดและทดสอบคุณภาพน้ำ 7in1 (Conductivity, TDS, Resistivity, pH, ORP, Free Chlorine, Temp.)

▼ Features Ultrameter II™ Series

Model Ultra-4PII Ultra-6PFCe
Parameters
  • Conductivity
  • TDS
  • Resistivity
  • Temp.
  • Conductivity
  • TDS
  • Resistivity
  • pH
  • ORP
  • Free Chlorine
  • Temp.
ORP mV and Free Chlorine No Yes
Autoranging Yes Yes
Adjustable Temp. Compensation Yes Yes
Adjustable Cond/TDS ratio Yes Yes
Memory (100 readings) Yes Yes
Date & Time Stamp Yes Yes
pH Calibration Prompts No Yes
Low battery indicator Yes Yes
Auto-off Yes Yes
Conductivity
Ranges 0 to 9999 μS/cm | 10 to 200 mS/cm
(in 5 autoranges)
Resolution 0.01(<100μS)
0.1(<1000μS)
1.0(<10mS)
0.01(<100mS)
0.1(<200mS)
Accuracy ±1% of reading
Auto Temperature Compensation 0 to 71°C
Adjustable Temperature
Compensation to 25ºC
0 to 9.99%/°C
Conductivity/TDS Ratios Preprogrammed KCl, 442™**, NaCl
Adjustable Conductivity/TDS Ratio Factor 0.20 to 7.99
TDS.
Ranges 0 to 9999 ppm | 10 to 200 ppt
(in 5 autoranges)
Resolution 0.01(<100ppm)
0.1(<1000ppm)
1.0(<10ppt)
0.01(<100ppt)
0.1(<200ppt)
Accuracy ±1% of reading
Auto Temperature Compensation 0 to 71°C
Adjustable Temperature
Compensation to 25ºC
0 to 9.99%/°C
Conductivity/TDS Ratios Preprogrammed KCl, 442™**, NaCl
Adjustable Conductivity/TDS Ratio Factor 0.20 to 7.99
Resistivity
Ranges 10KΩ to 30MΩ
Resolution 0.01(<100KΩ)
0.1(<1000KΩ)
0.1(>1MΩ)
Accuracy ±1% of reading
Auto Temperature Compensation 0 to 71°C
Adjustable Temperature
Compensation to 25ºC
0 to 9.99%/°C
Temperature
Ranges 0 to 71°C
Resolution 0.1°C
Accuracy ±0.1°C
Auto Temperature Compensation
SKUUltra-4PII
Weight352.000000
Dimension196 x 68 x 64 mm
ManufacturerMYRON
Data loggerYes
Conductivity & TDSConductivity (mS), TDS (ppm)
Very Low Conductivity measurementYes
Resolution

Conductivity: 0.01(<100μS) | 0.1(<1000μS) | 1.0(<10mS) | 0.01(<100mS) | 0.1(<200mS)
TDS: 0.01(<100ppm) | 0.1(<1000ppm) | 1.0(<10ppt) | 0.01(<100ppt) | 0.1(<200ppt)
Resistivity: 0.01(<100KΩ) | 0.1(<1000KΩ) | 0.1(>1MΩ)
Temperature: 0.1℃

Measurement Range

Conductivity: 0 to 9999 uS/cm | 10 to  200 mS/cm (5 Auto ranges)
TDS: 0  to 9999 ppm | 10 to 200 ppt (5 Auto ranges)
Resistivity: 10 KΩ to 30 KΩ
Temperatur: 0 to 71℃

Other Function

■ Choice of KCl, NaCl, and 442™ Natural Water Standards
■ Four-digit display for full 9999 readings, with autoranging capability up to 200 mS/200 ppt
■ Powerful microprocessor based surface-mount circuitry
■ Display prompts for simple pH calibration
■ Real Time Clock
■ Memory for 100 readings with Date & Time Stamp
■ Factory calibrations stored in microprocessor

 

Power SupplyBattery 9V alkaline
Water resistanceIP67
Sensor Output InterfaceNo
Accuracy

Conductivity: ±1% of reading
TDS: ±1% of reading
Resistivity: ±1% of reading
Temperature: ±0.1°C

Your Rating