NTi M4261 Microphone for NTi XL2 (Audio and Acoustic Analyzer)

SKU
M2230-WP
Out of stock

Microphone for NTi XL2 (Audio and Acoustic Analyzer)
High Dynamic Range 27 - 146 dB
Flat Frequency Response
48V Phantom Powered
Electronic Data Sheet

NTi M4261 Microphone for NTi XL2 (Audio and Acoustic Analyzer)

The M4261 uis the new class 2 measurement microphone for the XL2 Sound Level Meter. It extends the measurement range with a lower noise floor of typically 27 dB(A) and a higher maximum sound pressure level of 146 dB. The M4261 is another product launched to provide superior sound level measurement solutions to our customers.

The M4261 includes the popuar electronic data sheet for automated  sensor detection (ASD), fast setup and accurate measurements. It runs on 48 V phantom power and connects directly or via the ASD Cable to the XL2 Audio and Acoustic Analyzer.

Sensitivity typical @ 1kHz -36 dBV/Pa ±3 dB (16 mV/Pa)
Temperature Coefficient < ±0.02 dB / °C
Temperature Range 0°C to +40°C (32°F to 104°F)
Pressure Coefficient -0.04 dB / kPa
Influence of Humidity (non-condensing) < ±0.04 dB
Humidity 5% to 90% RH, non-condensing
Long Term Stability > 250 years / dB
Electronic Data Sheet NTi Audio ASD in accordance with IEEE P1451.4 V1.0, Class 2, Template 27
Output Impedance 100 Ohm balanced
Power Supply 48 VDC phantom power, 3 mA typical
Connector Balanced 3-pole XLR
Diameter Dimensions 20.5 mm (0.8")
Length Dimensions 150 mm (5.9")
Weight 83 g, 2.93 oz
Environmental Protection IP51
SKUM2230-WP
Weight430.000000
Dimension378 x 36mm
ManufacturerNTi
Your Rating