บริษัท เลกะ คอร์ปอเรชั่น จำกัด เราคือผู้นำด้านเครื่องมือวัดทุกชนิด
LINE ID : @lega
เกี่ยวกับเรา
เลกะทีม
บล็อค
คำถามที่พบบ่อย
รายการเปรียบเทียบ
THB▼
th Thai▼
ค้นหา
Advanced Search
เมนู
ค้นหา
หน้าแรก
0
ตะกร้าสินค้า
บัญชีผู้ใช้

Hioki IM3533 เครื่องวัดแอลซีอาร์

SKU
IM3533
main product photo
สินค้าหมด

เครื่องวัดแอลซีอาร์  100 mΩ to 100 MΩ
LCR, Transformer testing, Continuous testing modes
หน้าจอ TFT 5.7" touch-screen
ยี่ห้อ Hioki, Japan

สินค้าลงทะเบียนโปรดติดต่อฝ่ายขาย

Authorized_HIOKI

สอบถาม
หมวดหมู่: HIOKI, LCR Meters, Impedance Analyzers, Capacitance Meters
Hioki

Hioki IM3533 เครื่องวัดแอลซีอาร์

LCR, Transformer testing (N, M, ΔL), Continuous testing (LCR mode)
• ±0.05% accuracy with wide measurement range (DC, 1mHz to 200kHz, 5mV to 5V, 10uA to 50mA)
• Non-stop testing over mixed measurement conditions such as C-D and ESR at 10 times the speed of previous models
• Built-in low impedance high precision mode effective for testing low inductance or the ESR of aluminum electrolysis
  capacitance (10× the measurement speed and dramatic improvements in repeatability and stability over the previous model 3522-50)
• Dedicated modes for measuring transformer winding ratio, mutual inductance and temperature compensated DCR
• 2m/4m cable setting in addition to the standard 0m/1m

หน้าจอ TFT 5.7" touch-screen
แบตเตอรี่ AC Adapter
ขนาดตัวเครื่อง 330 × 119 × 168mm (3100g)
ยี่ห้อ Hioki, Japan

Measurement Mode LCR, Transformer testing (N, M, ΔL), Continuous testing (LCR mode)
Measurement parameters Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q, N, M, ΔL, T
Measurement range 100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.)
Display range Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only
θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999)
Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%), T: -10.0°C to 99.9°C
Basic accuracy Z : ±0.05% rdg. θ: ±0.03°
Measurement frequency 1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
Measurement signal level [Normal mode]V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms stepsCC mode: 10 μA to 50 mArms, 10 μArms steps[Low impedance high accuracy mode]V mode, CV mode: 5 mV to 2.5 Vrms, 1 mVrms stepsCC mode: 10 μA to 100 mArms, 10 μArms steps
Output impedance Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
Display 5.7-inch touch-screen color TFT, display can be set to ON/OFF
Measurement time 2 ms (1 kHz, FAST, display OFF, representative value)
Functions DC bias measurement, DC resistance temperature compensation (converted reference temperature display), Comparator, BIN measurement (classify function), Panel loading/saving, Memory function
Interfaces EXT I/O (Handler), USB communication (high-speed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply 100 to 240 V AC, 50/60 Hz, 50 VA max
Dimensions and mass 330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
Accessories Power cord × 1, Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1
Model Name Specifications
Probe and Test fixtures
IM9100 SMD TEST FIXTURE  • Direct connection type
• SMDs with electrodes on the bottom
• DC to 8MHz
• Measurable sample sizes: 01005 to 0402 (EIA)
9140-10 4-TERMINAL PROBE  Cable length 1 m (3.28 ft), DC to
200 kHz, impedance
characteristics of 50 Ω, 4-terminal
pair configuration, measurable
conductor diameter: ø0.3 to 5 mm
9261-10 TEST FIXTURE Cable length 1 m (3.28 ft), DC to 8
MHz, impedance characteristics of
50 Ω, 4-terminal pair configuration,
measurable conductor diameter:
ø0.3 to 1.5mm
9262 TEST FIXTURE Direct connection type, DC to 8
MHz, measurable conductor
diameter: ø0.3 to 2mm
9263 SMD TEST FIXTURE Direct connection type, DC to 8MHz, Test sample dimensions:1to 10mm
9268-10 DC BIAS VOLTAGE UNIT Direct connection type, 40 Hz to 8MHz, maximum applied voltage ofDC ±40 V
9269-10 DC BIAS CURRENT UNIT  Direct connection type, 40 Hz to 2MHz, maximum applied current ofDC 2 A
9500-10 4-TERMINAL PROBE  Cable length 1 m (3.28 ft), DC to200 kHz, impedancecharacteristics of 50 Ω,measurable conductor diameter:φ0.3 to 2mm
9677 SMD TEST FIXTURE Direct connection type, Formeasuring SMDs with electrodeson the side; DC to 120 MHz, testsample dimensions: 3.5 mm ±0.5mm (0.14 in ±0.02 in)
9699 SMD TEST FIXTURE Direct connection type, Formeasuring SMDs with electrodeson the bottom; DC to 120 MHztest sample dimensions: 1.0 mm(0.04 in) to 4.0 mm (0.16 in) wide,max. 1.5 mm (0.06 in) high
IM9901 CONTACT TIPS To replace the tip on the L2001,regular size, bundled withthe L2001
IM9902 CONTACT TIPS To replace the tip on the L2001,small size
L2000 4-TERMINAL PROBE  Cable length 1 m (3.28 ft), DC to 8MHz, impedance characteristics of50 Ω, 4-terminal pair configuration,measurable conductor diameter:ø0.3  to 5mm
L2001 PINCHER PROBE Cable length 73 cm (2.40 ft), DC to8 MHz, impedance characteristicsof 50 Ω, 4-terminal pairconfiguration, tip electrodespacing: 0.3 (0.01 in) to 6 mm (0.24 in)
IM9110 SMD TEST FIXTURE  • Direct connection two-terminal  measurement type• DC to 1 MHz• Measurable sample sizes:  008004 (EIA)
PC Communication
9151-02  GP-IB CONNECTOR CABLE  2 m (6.56 ft) length
Z3000 GP-IB INTERFACE  
Z3001 RS-232C INTERFACE   
Z3002 LAN INTERFACE  
Temperature probe
9478 SHEATH TYPETEMPERATURE PROBE  Pt100, Tip dia. φ2.3 mm (0.09 in),Cord length 1 m (3.28 ft),Waterproof construction
SKUIM3533
Weight3100.000000
ขนาด330 × 119 × 168mm
ผู้ผลิตHioki
บันทึกข้อมูลได้
Resolution

Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only

θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999)

Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%), T: -10.0°C to 99.9°C

Measurement Range100 mΩ to 100 MΩ, 10 ranges
ฟังก์ชั่น

DC bias measurement
DC resistance temperature compensation (converted reference temperature display)
Comparator
BIN measurement (classify function)
Panel loading/saving, Memory function

Power SupplyAC Adapter
ระดับการป้องกันNo
Sensor Output Interface

EXT I/O (handler)
USB communication (high-speed)
RS-232C
GP-IB
LAN

AccuracyZ : ±0.05% rdg. θ: ±0.03°
คะแนนของคุณ
PDF Download Catalog    ดาวน์โหลดแคตตาล็อค Hioki

อุปกรณ์มาตรฐาน
ตัวเครื่อง ×1
Power cord ×1
Instruction manual ×1
CD-R ×1

อุปกรณ์เสริม (แยกจำหน่าย)

Model

Name

 Specifications

Probe and Test fixtures
 

IM9100

 SMD TEST FIXTURE 

• Direct connection type
• SMDs with electrodes on the bottom
• DC to 8MHz
• Measurable sample sizes: 01005 to 0402 (EIA)
  9140-10 4-TERMINAL PROBE 

Cable length 1 m (3.28 ft), DC to
200 kHz, impedance
characteristics of 50 Ω, 4-terminal
pair configuration, measurable
conductor diameter: ø0.3 to 5 mm
  9261-10 TEST FIXTURE

Cable length 1 m (3.28 ft), DC to 8
MHz, impedance characteristics of
50 Ω, 4-terminal pair configuration,
measurable conductor diameter:
ø0.3 to 1.5mm
  9262 TEST FIXTURE

Direct connection type, DC to 8
MHz, measurable conductor
diameter: ø0.3 to 2mm
  9263 SMD TEST FIXTURE Direct connection type, DC to 8
MHz, Test sample dimensions:1
to 10mm
  9268-10 DC BIAS VOLTAGE UNIT Direct connection type, 40 Hz to 8
MHz, maximum applied voltage of
DC ±40 V
  9269-10 DC BIAS CURRENT UNIT  Direct connection type, 40 Hz to 2
MHz, maximum applied current of
DC 2 A
  9500-10 4-TERMINAL PROBE  Cable length 1 m (3.28 ft), DC to
200 kHz, impedance
characteristics of 50 Ω,
measurable conductor diameter:
φ0.3 to 2mm
  9677 SMD TEST FIXTURE Direct connection type, For
measuring SMDs with electrodes
on the side; DC to 120 MHz, test
sample dimensions: 3.5 mm ±0.5
mm (0.14 in ±0.02 in)
  9699 SMD TEST FIXTURE Direct connection type, For
measuring SMDs with electrodes
on the bottom; DC to 120 MHz
test sample dimensions: 1.0 mm
(0.04 in) to 4.0 mm (0.16 in) wide,
max. 1.5 mm (0.06 in) high
  IM9901 CONTACT TIPS To replace the tip on the L2001,
regular size, bundled with
the L2001
  IM9902 CONTACT TIPS To replace the tip on the L2001,
small size
  L2000 4-TERMINAL PROBE  Cable length 1 m (3.28 ft), DC to 8
MHz, impedance characteristics of
50 Ω, 4-terminal pair configuration,
measurable conductor diameter:
ø0.3  to 5mm
  L2001 PINCHER PROBE Cable length 73 cm (2.40 ft), DC to
8 MHz, impedance characteristics
of 50 Ω, 4-terminal pair
configuration, tip electrode
spacing: 0.3 (0.01 in) to 6 mm (0.24 in)
  IM9110 SMD TEST FIXTURE  • Direct connection two-terminal
  measurement type
• DC to 1 MHz
• Measurable sample sizes:
  008004 (EIA)

PC Communication
  9151-02  GP-IB CONNECTOR CABLE  2 m (6.56 ft) length
  Z3000 GP-IB INTERFACE  
  Z3001 RS-232C INTERFACE   
  Z3002 LAN INTERFACE  

Temperature probe
  9478 SHEATH TYPE
TEMPERATURE PROBE 		 Pt100, Tip dia. φ2.3 mm (0.09 in),
Cord length 1 m (3.28 ft),
Waterproof construction

 

 

ผู้ดูสินค้านี้มักจะดูสินค้านี้ด้วย

HIOKI IM3533-01 เครื่องวัดแอลซีอาร์

Hioki IM3533-01 เครื่องวัดแอลซีอาร์

Pre-Order Item